Product categories

The range.

Fourteen categories, curated to representative trade lines rather than an exhaustive catalogue. Every line is quoted to specification. There are no prices on page and no checkout. If a line you need is not listed, ask. The library shows breadth. The quotation confirms detail.

01 · 21 representative lines

Timber & Sheet Materials

Structural softwood, engineered joists and sheet materials, supplied against cutting lists and framing schedules. Carcassing is graded to C16 or C24 and treated to the use class the job calls for. Chain of custody certification is available on request. Deliveries run nationwide, with crane offload arranged where a site needs it.

Request a quote for Timber & Sheet Materials
Timber & Sheet Materials, material detail

Carcassing & Structural

  • C24 Carcassing Timber

    Kiln-dried, regularised structural carcassing for floors and roofs.

    47 × 100-225mm · lengths to 6.0m · BS EN 14081 graded

    Quote
  • C16 Carcassing Timber

    General structural carcassing for studwork and non-critical spans.

    47 × 75-200mm · kiln-dried, eased edges

    Quote
  • Treated Carcassing (UC3)

    Pressure-treated carcassing for external and ground-contact-adjacent use.

    Use class 3 treatment · green or brown

    Quote
  • CLS Studwork Timber

    Planed, eased-edge studwork for partitions and framing.

    38 × 63mm and 38 × 89mm · 2.4-4.8m

    Quote
  • Timber I-Joists

    Engineered I-joists quoted against floor layouts and span tables.

    Depths 195-400mm · design support available

    Quote
  • Glulam Beams

    Glued-laminated beams cut to length for openings and ridge lines.

    GL24h/GL28c · sections to order

    Quote

Sheet Materials

  • Structural Hardwood Plywood

    Exterior-glue hardwood-faced plywood for structural and general use.

    2440 × 1220mm · 9-25mm · EN 636-2

    Quote
  • Shuttering Plywood

    Formwork-grade plywood for concrete shuttering and site protection.

    2440 × 1220mm · 18mm · reusable faces

    Quote
  • Marine Plywood

    BS 1088 marine plywood for high-moisture applications.

    2440 × 1220mm · 6-25mm · WBP bonded

    Quote
  • OSB3 Boards

    Load-bearing oriented strand board for humid conditions.

    2440 × 1220mm · 9/11/18mm · EN 300 OSB3

    Quote
  • MDF, Standard and Moisture Resistant

    Standard and MR MDF for joinery and second fix.

    2440 × 1220mm · 6-25mm · CE marked

    Quote
  • T&G Chipboard Flooring

    P5 moisture-resistant tongue-and-groove flooring panels.

    2400 × 600mm · 18/22mm · EN 312 P5

    Quote

Cladding & Decking

  • Featheredge Boards

    Sawn treated featheredge for fencing and agricultural cladding.

    125-175mm cover · UC3 treated

    Quote
  • Shiplap Cladding

    Planed softwood shiplap profile cladding.

    119 × 14.5mm finished · treated options

    Quote
  • Thermally Modified Cladding

    Stable, durable thermowood cladding for external facades.

    Secret-fix and square-edge profiles

    Quote
  • Treated Decking Board

    Grooved and smooth softwood decking, UC3 treated.

    32 × 125mm nominal · 3.6-4.8m

    Quote
  • Composite Decking

    Wood-polymer composite boards with matching trims.

    Solid and hollow profiles · 3.6m

    Quote

Mouldings & Finishing

  • MDF Skirting & Architrave

    Primed MDF profiles in ogee, torus, chamfered and square patterns.

    68-219mm · 4.4m lengths · pre-primed

    Quote
  • Planed Softwood (PSE)

    Planed-square-edge softwood for joinery and finishing.

    Ex 25 × 50mm to ex 50 × 225mm

    Quote
  • Door Lining Sets

    Softwood and MDF lining sets with loose stops.

    27/32mm × 94-138mm · fire-rated options

    Quote
  • Timber Sleepers

    New and treated landscaping sleepers.

    200 × 100mm · 2.4m · UC4 options

    Quote

02 · 19 representative lines

Bricks, Blocks & Lintels

Facing bricks, engineering bricks, aircrete and aggregate blocks, and a lintel schedule service. We match bricks from a sample or a site photograph and return physical samples before anything is ordered. Lintels are taken off your drawings. Full loads and part loads are delivered to programme across the UK.

Request a quote for Bricks, Blocks & Lintels
Bricks, Blocks & Lintels, material detail

Facing Bricks

  • Wirecut Facing Bricks

    Machine-made facing bricks in a broad colour and texture range.

    65mm · F2/S2 durability · pack ~400

    Quote
  • Soft Mud Stock Bricks

    Stock bricks with a handmade character for traditional elevations.

    65mm · frost-resistant F2

    Quote
  • Handmade & Heritage Bricks

    Premium handmade and reclaimed-appearance bricks for conservation work.

    65/68/73mm imperial options

    Quote
  • Class B Engineering Bricks

    Dense semi-vitreous bricks for below-DPC and structural use.

    65mm · ≥75N/mm² · ≤7% absorption

    Quote
  • Brick Specials

    Plinths, bullnose, cant and angle specials made to order.

    BS 4729 standard specials

    Quote
  • Brick Matching Service

    Match against sample or photo, with physical samples supplied.

    Panel references on request

    Quote

Blocks

  • Standard Aircrete Blocks

    Lightweight aircrete for inner leaf and partitions.

    3.6N/mm² · 100mm · 440 × 215mm

    Quote
  • High Strength Aircrete Blocks

    Higher-strength aircrete for loadbearing and foundation use.

    7.3N/mm² · 100-215mm

    Quote
  • Dense Concrete Blocks

    Dense aggregate blocks for structural masonry.

    7.3N/mm² · 100/140/215mm

    Quote
  • Medium Dense Blocks

    Balanced strength and workability for general masonry.

    3.6/7.3N/mm² · paint-grade faces

    Quote
  • Coursing Bricks

    Aircrete and concrete coursing units for levelling courses.

    65mm · matches block thermal path

    Quote

Lintels

  • Steel Cavity Wall Lintels

    Insulated steel lintels for standard cavity walls.

    90-150mm cavity · lengths 600-4800mm

    Quote
  • Heavy Duty Steel Lintels

    High-load lintels for wide openings and point loads.

    Engineered to loading schedule

    Quote
  • Prestressed Concrete Lintels

    Prestressed units for internal and external openings.

    100 × 65mm to 215 × 140mm

    Quote
  • Lintel Scheduling Service

    Full lintel take-off from architects' and engineers' drawings.

    Schedule returned with quotation

    Quote

DPC & Masonry Accessories

  • Damp Proof Course

    Polyethylene and pitch polymer DPC rolls.

    100-600mm × 30m · BS 6515

    Quote
  • Cavity Trays & Closers

    Preformed cavity trays and insulated cavity closers.

    To suit cavity width

    Quote
  • Weep Vents & Telescopic Vents

    Cavity ventilation and drainage components.

    Colour-matched options

    Quote
  • Mortar Additives & Plasticiser

    Air-entraining plasticiser and frostproofer.

    5-25L · dosed to mix

    Quote

03 · 18 representative lines

Cement, Aggregates & Sand

Bagged cement and binders, bulk aggregates and washed sands for every stage of the build. Tipped, craned and bulk bag deliveries are arranged nationwide. Scheduled call off suits groundworks programmes and repeat pours.

Request a quote for Cement, Aggregates & Sand
Cement, Aggregates & Sand, material detail

Cement & Binders

  • General Purpose Cement

    CEM II multi-purpose cement in weather-resistant bags.

    25kg · 32,5 R · EN 197-1

    Quote
  • White Cement

    White Portland cement for renders and architectural mortar.

    25kg · 52,5 N

    Quote
  • Postcrete

    Rapid-setting post-fix concrete, pour-and-set.

    20kg · sets in 10 minutes

    Quote
  • Hydrated Lime

    Hydrated lime for mortar workability and traditional mixes.

    25kg · CL 90-S

    Quote
  • Ready-Mixed Mortar

    Factory-batched mortar in tubs and silo supply for larger sites.

    Retarded 36hr · colour-matched

    Quote

Aggregates

  • MOT Type 1 Sub-Base

    Crushed granular sub-base for drives, paths and slabs.

    Bulk bag ~850kg · SHW Clause 803

    Quote
  • Ballast 20mm

    All-in sand and gravel ballast for concrete mixing.

    Bulk bag and 25kg · washed

    Quote
  • Gravel & Shingle

    Washed rounded gravel for drainage, pipe bedding and decorative use.

    10mm and 20mm · bulk bag

    Quote
  • Limestone Chippings

    Crushed limestone for drives and sub-surface drainage.

    20mm · bulk bag ~850kg

    Quote
  • Recycled Crushed Aggregate

    Graded recycled Type 1 equivalent for sustainable sub-base.

    6F2/Type 1 recycled · bulk loads

    Quote

Sand

  • Building Sand

    Soft washed sand for bricklaying mortar.

    Bulk bag ~850kg · 25kg bags

    Quote
  • Sharp Sand

    Coarse washed sand for screeds and concrete.

    Bulk bag ~850kg · BS EN 12620

    Quote
  • Plastering Sand

    Fine washed sand for rendering and plastering coats.

    Bulk bag · low clay content

    Quote
  • Kiln-Dried Sand

    Fine dry sand for block paving joints.

    25kg · brush-in grade

    Quote

Ready-to-Use Mixes

  • Concrete Mix

    Pre-blended concrete mix for small pours and repairs.

    20/25kg · ST4 equivalent

    Quote
  • Mortar Mix

    Pre-blended sand-cement mortar for bricklaying and pointing.

    20/25kg · just add water

    Quote
  • Repair Mortar

    Polymer-modified mortar for concrete repair.

    25kg · low shrinkage

    Quote
  • Self-Levelling Compound

    Flowing floor compound for subfloor preparation.

    20kg · 2-50mm depth

    Quote

04 · 19 representative lines

Roofing & Rainwater

Pitched roofing, flat roofing systems and rainwater goods quoted from roof plans and elevations. Tiles and slates are supplied to fixing specifications. Flat roofs are quoted as complete build ups. A full roof take off comes back with the quotation.

Request a quote for Roofing & Rainwater
Roofing & Rainwater, material detail

Tiles & Slates

  • Concrete Interlocking Tiles

    Large-format interlocking tiles for fast coverage.

    ~9.7 tiles/m² · min pitch 17.5°

    Quote
  • Clay Plain Tiles

    Traditional clay plain tiles, machine-made and handcrafted.

    265 × 165mm · 60 tiles/m²

    Quote
  • Natural Slate

    Spanish and Welsh natural slate, graded and holed.

    500 × 250mm typical · T1/S1/W1

    Quote
  • Fibre Cement Slates

    Lightweight man-made slates with consistent sizing.

    600 × 300mm · pre-holed

    Quote
  • Ridge, Hip & Valley

    Ridge tiles, hip irons, dry-fix systems and valley troughs.

    Dry-fix BS 5534 compliant

    Quote

Flat Roofing

  • EPDM Rubber Membrane

    Single-ply EPDM supplied cut to roof size with trims and adhesives.

    1.2/1.5mm · one-piece to 15m

    Quote
  • Torch-On Felt System

    Two and three-layer reinforced bitumen membranes.

    Underlay + 4mm mineral cap sheet

    Quote
  • GRP Fibreglass Kits

    Complete wet-lay GRP roofing kits with trims and topcoat.

    450g matting · 20yr system

    Quote
  • Liquid Waterproofing

    Cold-applied liquid membranes for detailing and overlays.

    PU and hybrid systems

    Quote

Membranes & Battens

  • Breathable Roof Underlay

    Vapour-permeable underlay for cold and warm pitched roofs.

    1m × 50m · W1 resistance

    Quote
  • Graded Roofing Batten

    BS 5534 graded and stamped treated batten.

    25 × 38 / 25 × 50mm · blue/gold

    Quote
  • Ventilation & Dry Verge

    Eaves vents, ridge vents and dry verge systems.

    Colour-matched PVC and alloy

    Quote

Rainwater Goods

  • Half-Round Gutter System

    PVC-U half-round guttering with full fittings range.

    112mm · black, white, grey, brown

    Quote
  • Deep-Flow Guttering

    High-capacity gutter for larger roof areas.

    115mm high-capacity profile

    Quote
  • Downpipes & Fittings

    Round and square downpipe with shoes, offsets and clips.

    68mm round · 65mm square

    Quote
  • Cast-Effect Aluminium Rainwater

    Heritage-style aluminium gutters and pipes.

    Powder-coated · 30yr finish

    Quote

Roof Windows

  • Centre-Pivot Roof Windows

    Pine and white-finish centre-pivot windows.

    550 × 780 to 1340 × 1400mm

    Quote
  • Top-Hung Escape Windows

    Means-of-escape compliant top-hung windows.

    Clear opening ≥0.33m²

    Quote
  • Flashing Kits

    Slate and tile flashing kits with insulation collars.

    To window size and covering

    Quote

05 · 19 representative lines

Drainage

Underground drainage, soil and waste, surface water management and access covers, quoted from drainage layouts and manhole schedules. Load classes are specified to position. Adoptable and non-adoptable systems are both covered, with phased deliveries for groundworks packages anywhere in the UK.

Request a quote for Drainage
Drainage, material detail

Underground Drainage

  • 110mm Underground Pipe

    Terracotta PVC-U sewer pipe, plain and socketed.

    110mm × 3/6m · BS EN 1401 SN4

    Quote
  • 160mm Underground Pipe

    Larger-bore underground pipe for main runs.

    160mm × 3/6m · SN4

    Quote
  • Bends, Junctions & Couplers

    Full fittings range for 110mm and 160mm systems.

    87.5°-15° · single/double socket

    Quote
  • Inspection Chambers

    Polypropylene chamber bases, risers and lids.

    320/450mm · depths to 3m

    Quote
  • Clay Drainage

    Vitrified clay pipe and fittings for adoptable sewers.

    100-300mm · BS EN 295

    Quote

Soil & Waste

  • 110mm Soil Pipe & Fittings

    Push-fit and solvent soil systems with access fittings.

    110mm · black, grey, white

    Quote
  • Waste Pipe Systems

    Solvent and push-fit waste in all common sizes.

    32/40/50mm · MuPVC and PP

    Quote
  • Traps & McAlpine-Pattern Fittings

    P, S and bottle traps, washing machine traps.

    75mm seal · 32/40mm

    Quote
  • Air Admittance Valves

    Internal ventilation valves for soil stacks.

    110mm · EN 12380 A1

    Quote

Channel & Surface Water

  • A15 Channel Drainage

    Polypropylene channel with galvanised grate for domestic traffic.

    1m units · A15 loading

    Quote
  • B125 and C250 Polymer Channel

    Heavy-duty channel runs for drives and yards.

    B125/C250 · ductile grates

    Quote
  • Yard & Road Gullies

    Trapped gullies, hoppers and gully grates.

    PVC-U and clay options

    Quote
  • Linear Slot Drainage

    Discreet slot drainage for paved landscapes.

    Stainless and galvanised tops

    Quote

Access Covers

  • A15 and B125 Manhole Covers

    Galvanised and ductile covers for pedestrian and light traffic.

    450 × 450 to 600 × 600mm

    Quote
  • D400 Ductile Covers

    Carriageway-rated covers and frames.

    D400 · EN 124

    Quote
  • Recessed Covers

    Block-pavior and screed infill recessed trays.

    Single and double seal

    Quote

Land Drainage & Attenuation

  • Perforated Land Drain Coil

    Flexible perforated coil for field and garden drainage.

    80/100/160mm × 25-100m

    Quote
  • Geotextile Membrane

    Non-woven geotextile for separation and filtration.

    4.5 × 11m to 4.5 × 100m

    Quote
  • Soakaway Crates

    Modular attenuation and soakaway cells with silt traps.

    ~95% void ratio · wrapped options

    Quote

06 · 21 representative lines

Insulation & Drylining

Thermal and acoustic insulation, plasterboard systems and drylining sundries quoted against U-value targets and specification clauses. Board, fixings, jointing and beads are quoted as one package. Mixed loads are consolidated for each fix stage.

Request a quote for Insulation & Drylining
Insulation & Drylining, material detail

Rigid Insulation

  • PIR Insulation Boards

    Foil-faced PIR for floors, walls and roofs.

    2400 × 1200mm · 25-150mm · λ 0.022

    Quote
  • Insulated Plasterboard

    PIR-bonded thermal laminate boards.

    2400 × 1200mm · 27-93mm

    Quote
  • EPS Boards

    Expanded polystyrene for floors and external wall systems.

    EPS70/100 · 25-100mm

    Quote
  • XPS Boards

    High-compressive-strength extruded polystyrene.

    300kPa · inverted roofs, floors

    Quote

Mineral Wool

  • Loft Roll

    Glass mineral wool roll for ceilings and lofts.

    100-200mm · combi-cut widths

    Quote
  • Cavity Wall Batts

    Full-fill cavity batts, water-repellent.

    455 × 1200mm · 50-150mm

    Quote
  • Acoustic Partition Roll

    Acoustic infill for stud partitions and floors.

    25-100mm · 600mm widths

    Quote
  • Rock Mineral Wool Slabs

    High-density slabs for fire and acoustic performance.

    45-140kg/m³ · A1 fire

    Quote

Plasterboard

  • Standard Plasterboard

    Tapered and square edge wallboard.

    2400 × 1200mm · 12.5mm

    Quote
  • Moisture Resistant Board

    Green board for bathrooms and kitchens.

    2400 × 1200mm · 12.5mm · H1

    Quote
  • Fire Board

    Type F boards for fire-rated systems.

    12.5/15mm · pink faced

    Quote
  • Acoustic Board

    High-density board for sound-rated partitions.

    12.5/15mm · dB-rated systems

    Quote
  • Plank & 15mm Wallboard

    15mm and 19mm boards for impact rated and sound rated systems.

    To system specification

    Quote

Jointing & Beads

  • Joint Compounds

    Air-drying and setting jointing compounds.

    Ready-mixed 20kg · 60/90 setting

    Quote
  • Scrim & Joint Tapes

    Self-adhesive scrim and paper joint tape.

    48/50mm × 90m

    Quote
  • Angle, Stop and Shadow Beads

    Galvanised, stainless and PVC drylining beads.

    2.4/3.0m lengths

    Quote
  • Acoustic & Intumescent Sealant

    System sealants for rated partitions.

    380/600ml · tested systems

    Quote

Metal Framing & Fixings

  • Metal Stud & Track

    C-studs, U-track and deep-flange track.

    50/70/92mm · 0.5-0.7mm gauge

    Quote
  • Resilient Bars & MF Ceiling

    MF5/MF7 components and resilient channel.

    3.6m lengths

    Quote
  • Drywall Screws

    Fine and coarse thread, collated options.

    25-100mm · phosphate coated

    Quote
  • Insulation Fixings

    Hammer and screw-in insulation anchors.

    To substrate and thickness

    Quote

07 · 17 representative lines

Plumbing & Heating

First and second fix plumbing, heating distribution and hot water storage supplied against M&E schedules. Pipework, controls, cylinders and emitters are quoted as complete systems. Staged deliveries are aligned to fix dates on sites anywhere in the UK.

Request a quote for Plumbing & Heating
Plumbing & Heating, material detail

Pipe & Fittings

  • Copper Tube

    Table X copper tube for heating and domestic water.

    15/22/28mm × 3m · EN 1057

    Quote
  • Push-Fit Barrier Pipe

    Polybutylene barrier pipe in straight lengths and coils.

    10-28mm · coils to 120m

    Quote
  • Push-Fit & Compression Fittings

    Full fittings ranges across common sizes.

    15-28mm · WRAS approved

    Quote
  • Press-Fit Systems

    M-profile press fittings for commercial installs.

    15-54mm · copper and carbon

    Quote
  • Pipe Insulation

    PE and nitrile pipe lagging.

    13-25mm wall · 15-28mm bore

    Quote

Valves & Controls

  • Thermostatic Radiator Valves

    TRV and lockshield packs, standard and angled.

    15mm · bi-directional

    Quote
  • Isolation & Gate Valves

    Service valves, full-bore levers and gate valves.

    15-28mm · WRAS

    Quote
  • Motorised Zone Valves

    2-port and 3-port motorised valves.

    22/28mm · 5-wire

    Quote
  • Programmers & Room Stats

    Heating controls from basic timers to smart stats.

    Boiler Plus compliant options

    Quote

Cylinders & Storage

  • Unvented Cylinders

    Stainless unvented cylinders, direct and indirect.

    120-300L · G3 kit included

    Quote
  • Vented Copper Cylinders

    Direct and indirect vented cylinders.

    900-1500 × 450mm · Part L

    Quote
  • Cold Water Storage Tanks

    Polyethylene storage and feed tanks with byelaw kits.

    18-100 gallon

    Quote
  • Thermal Stores & Buffers

    Buffer vessels for heat pump systems.

    50-500L · quoted to schematic

    Quote

Radiators & UFH

  • Type 21 and 22 Panel Radiators

    Compact convector radiators, white.

    300-700mm high · to 3000mm

    Quote
  • Column Radiators

    2, 3 and 4-column steel radiators.

    White, anthracite, raw metal

    Quote
  • Towel Rails

    Straight and curved ladder rails.

    Chrome, white, anthracite

    Quote
  • Underfloor Heating Systems

    Staple, clip-rail and overlay UFH kits with manifolds.

    16mm PE-RT · quoted per m²

    Quote

08 · 21 representative lines

Electrical & Lighting

Cable, containment, wiring accessories and site power supplied against electrical schedules and drawing take offs. Cable is BASEC approved. Accessories come from the major brands. First and second fix packages are consolidated and delivered to any UK site.

Request a quote for Electrical & Lighting
Electrical & Lighting, material detail

Cable

  • Twin & Earth Cable

    Flat profile 6242Y for fixed domestic wiring.

    1.0-10mm² · 50/100m drums

    Quote
  • Armoured Cable (SWA)

    Steel wire armoured cable for external and buried runs.

    1.5-25mm² · 2-4 core

    Quote
  • Flexible Cable

    3093Y/3183Y heat-resistant and ordinary flex.

    0.75-2.5mm² · cut lengths

    Quote
  • Data & Network Cable

    Cat5e and Cat6 UTP in boxes.

    305m pull-box · LSZH options

    Quote
  • Fire-Rated Cable

    Fire-resistant cable for alarm and emergency circuits.

    FP200-equivalent · 1.5/2.5mm²

    Quote

Containment

  • Steel Trunking

    Galvanised trunking with full fittings.

    50 × 50 to 150 × 150mm

    Quote
  • Steel and PVC Conduit

    20/25mm conduit with boxes and accessories.

    3.75m lengths · black/galv

    Quote
  • Cable Tray & Basket

    Light and medium-duty tray, wire basket.

    50-600mm · pre-galv and HDG

    Quote
  • Mini Trunking & Dado

    PVC mini-trunking and 3-compartment dado.

    16 × 16 to 100 × 50mm

    Quote

Wiring Accessories

  • White Moulded Accessories

    Switches and sockets, standard white ranges.

    1-2 gang · 13A · BS 1363

    Quote
  • Metal Clad Accessories

    Surface metal-clad switchgear for plant and garages.

    13A · with back boxes

    Quote
  • Consumer Units

    Populated and unpopulated metal consumer units.

    6-21 way · SPD options · 18th Ed

    Quote
  • Circuit Protection

    MCBs, RCBOs and surge devices.

    6-50A · Type A RCBO

    Quote
  • Back Boxes & Grid

    Galvanised knockout boxes and grid systems.

    25/35/47mm depths

    Quote

Site Power & Lighting

  • 110V Transformers & Leads

    Site transformers, splitters and extension leads.

    3.3/5kVA · 16A fittings

    Quote
  • LED Site Lighting

    Festoon, task lights and tripod floods.

    110V · IP65

    Quote
  • LED Floodlights

    Fixed and PIR floodlights for buildings and yards.

    10-200W · IP65

    Quote
  • Batten & Panel Luminaires

    LED battens and 600 × 600 panels.

    4000K · emergency options

    Quote

Ventilation

  • Extractor Fans

    Axial and centrifugal fans with timer and humidistat.

    100/150mm · Part F rates

    Quote
  • Ducting & Grilles

    Rigid and flexible ducting with external grilles.

    100-150mm · round and flat

    Quote
  • MVHR Components

    Heat-recovery units and semi-rigid duct systems.

    Quoted to ventilation design

    Quote

09 · 19 representative lines

Landscaping & Paving

Paving, walling, fencing and decorative aggregates for external works packages. Quotations come from landscape layouts and hard landscaping schedules. Paving is batched by shade where it matters. Bulk deliveries are sequenced with groundwork phases nationwide.

Request a quote for Landscaping & Paving
Landscaping & Paving, material detail

Paving

  • Porcelain Paving

    Vitrified 20mm porcelain in stone and concrete effects.

    600 × 600 / 900 × 600mm · R11

    Quote
  • Indian Sandstone

    Riven natural sandstone in mixed-size project packs.

    22mm calibrated · 15.3-18.9m² packs

    Quote
  • Concrete Paving Flags

    Pressed concrete flags for paths and utility paving.

    450 × 450 / 600 × 600mm

    Quote
  • Granite & Sandstone Setts

    Natural stone setts for edging and detail.

    100 × 100 × 100mm · cropped

    Quote
  • Council Flags

    BS-pattern paving for adoptable and highways work.

    600 × 600 × 50mm · BS EN 1339

    Quote

Block Paving & Kerbs

  • 50mm Block Paving

    Standard concrete block paving in brindle, charcoal and buff.

    200 × 100 × 50mm · 9.76m²/pack

    Quote
  • Permeable Block Paving

    SuDS-compliant permeable paving systems.

    80mm · nib-spaced joints

    Quote
  • Kerbs & Edgings

    Concrete road kerbs, path edgings and radius units.

    HB2/BN · 915mm units

    Quote
  • Decorative Edging

    Rope-top, flat-top and stone edging.

    600mm units · multiple finishes

    Quote

Fencing

  • Closeboard Fence Panels

    Heavy-duty framed closeboard panels.

    1.83m wide · 0.9-1.83m high

    Quote
  • Waney Lap Panels

    Overlap panels for general boundary fencing.

    1.83m wide · dip treated

    Quote
  • Concrete and Timber Fence Posts

    Slotted concrete and UC4 timber posts.

    2.4-3.0m · 100 × 100mm timber

    Quote
  • Gravel Boards

    Concrete and treated timber gravel boards.

    1.83m · 150/300mm high

    Quote
  • Metal Railings & Mesh

    Bow-top railing and weldmesh panel fencing.

    Quoted to boundary schedule

    Quote

Decorative & Ground Care

  • Decorative Gravel

    Golden gravel, flint and Cotswold chippings.

    10-20mm · bulk bag ~850kg

    Quote
  • Slate Chippings

    Blue, plum and green slate mulch.

    20/40mm · bulk bag

    Quote
  • Bark Mulch

    Ornamental and play-grade bark.

    60-100L bags · bulk loads

    Quote
  • Weed Membrane

    Woven ground-cover membrane.

    1-4.5m widths · 50-100gsm

    Quote
  • Turf & Topsoil

    Cultivated lawn turf and screened topsoil.

    Turf per m² · topsoil bulk bag

    Quote

10 · 17 representative lines

Fixings, Sealants & Adhesives

Structural anchors, screws, sealants and adhesives held as trade lines in boxed quantities, not retail blister packs. Anchors are ETA assessed and sealants carry EN classifications, with manufacturer data supplied at quotation. Fixings lines ride on any material load at no extra delivery cost.

Request a quote for Fixings, Sealants & Adhesives
Fixings, Sealants & Adhesives, material detail

Structural Fixings

  • Through Bolts

    Zinc and stainless expansion anchors for concrete.

    M6-M16 · ETA Option 1

    Quote
  • Chemical Resin Anchors

    Polyester, epoxy and vinylester injection resins.

    300/410ml · cracked concrete rated

    Quote
  • Coach Screws & Bolts

    Hex coach screws and cup-square coach bolts.

    M6-M12 · BZP and galv

    Quote
  • Frame & Hammer Fixings

    Nylon frame fixings for masonry.

    8/10mm × 80-160mm

    Quote
  • Joist Hangers & Connectors

    Timber-to-timber and masonry hangers, angle brackets.

    38-100mm · galvanised

    Quote

Screws & Nails

  • Multi-Purpose Woodscrews

    Boxed trade woodscrews, pozi and torx.

    3.0-6.0mm · boxes of 200

    Quote
  • Decking & Timber-Lok Screws

    Coated external screws and structural timber screws.

    To 300mm · green/brown coated

    Quote
  • Collated Screws & Nails

    Drywall collated strips and framing nails.

    First-fix 90mm · drywall 25-55mm

    Quote
  • Masonry Nails & Pins

    Hardened nails and pins for direct fixing.

    25-100mm

    Quote

Sealants

  • Low-Modulus Silicone

    Neutral-cure silicone for glazing and perimeter joints.

    310ml · ISO 11600 F&G 25LM

    Quote
  • Hybrid Polymer Sealant-Adhesive

    All-surface sealant and adhesive, overpaintable.

    290ml · bonds wet surfaces

    Quote
  • Acrylic Caulk

    Decorators' flexible filler and caulk.

    310ml · paintable in 1hr

    Quote
  • Fire-Rated Sealants

    Intumescent acrylic and graphite sealants.

    Up to 4hr tested joints

    Quote

Foams & Adhesives

  • Expanding Foam

    Hand-held and gun-grade PU foam.

    750ml · B3 and fire-rated B1

    Quote
  • Grab Adhesives

    Solvent-free and hybrid grab adhesives.

    290-350ml cartridges

    Quote
  • Contact & Spray Adhesives

    High-strength contact adhesives for sheet materials.

    500ml-5L · spray cans

    Quote
  • Epoxy & PU Wood Adhesives

    Structural two-part epoxy and D4 PU wood glue.

    D4 to EN 204

    Quote

11 · 18 representative lines

Tools & Site Equipment

Hand tools, power tools and site consumables held as trade lines for site setup and day to day work. Kit is quoted by the box or the van load, not by the single item. PPE is sized and standards marked.

Request a quote for Tools & Site Equipment
Tools & Site Equipment, material detail

Hand Tools

  • Trowels & Floats

    Brick trowels, pointing trowels, plastering trowels and floats.

    Carbon and stainless · 11-18in

    Quote
  • Spirit Levels

    Box section levels and torpedo levels.

    600-1800mm · shock capped

    Quote
  • Hammers & Bars

    Club hammers, claw hammers, bolsters and wrecking bars.

    Forged heads · fibreglass shafts

    Quote
  • Hand Saws & Knives

    First and second fix saws, hardpoint blades, utility knives.

    22in · 7-11 TPI

    Quote
  • Tapes & Marking

    Tape measures, chalk lines and marking gauges.

    5-30m · Class II

    Quote

Power Tools

  • SDS Drills

    SDS plus rotary hammers, corded and 18V.

    2-3.5J · chisel function

    Quote
  • Impact Drivers & Combi Drills

    18V drivers and drills, body only or kits.

    18V · brushless options

    Quote
  • Angle Grinders

    115mm and 230mm grinders for cutting and preparation.

    110V and 18V

    Quote
  • Circular & Mitre Saws

    Rip saws and mitre saws for first and second fix.

    185-305mm blades

    Quote
  • Mixing Drills & Paddles

    High torque mixers for plaster, mortar and compounds.

    1200-1800W · M14 paddles

    Quote

Site Equipment

  • Wheelbarrows & Buckets

    Builders' barrows, gorilla tubs and buckets.

    85-120L barrows

    Quote
  • Acrow Props & Trestles

    Adjustable steel props, builders' trestles and strongboys.

    Size 0-4 props

    Quote
  • Shovels & Groundwork Tools

    Shovels, spades, rakes, picks and tampers.

    Steel and fibreglass shafts

    Quote
  • Access Equipment

    Steps, combination ladders and low level platforms.

    EN 131 rated

    Quote

PPE & Consumables

  • Hi-Vis & Workwear

    Vests, jackets and trousers, sized and standards marked.

    EN ISO 20471

    Quote
  • Gloves & Eye Protection

    Cut rated gloves, safety specs and goggles.

    EN 388 · EN 166

    Quote
  • Safety Boots

    Steel and composite toe site boots.

    S3 · sizes 6-13

    Quote
  • Blades, Bits & Discs

    Boxed consumables for saws, drills and grinders.

    Trade boxed quantities

    Quote

12 · 17 representative lines

Decorating & Finishing

Trade paint, plaster and preparation products for handover standard finishes. Contract and durable grades are supplied by the pallet, with matched tinting on request. Snagging and preparation consumables travel with the main material package.

Request a quote for Decorating & Finishing
Decorating & Finishing, material detail

Paint

  • Contract Matt Emulsion

    High-opacity contract emulsion for new plaster.

    10L · white and magnolia

    Quote
  • Durable Matt Emulsion

    Scrubbable washable matt for finished schemes.

    5/10L · Class 1 scrub

    Quote
  • Undercoat & Primers

    Wood, metal and multi-surface primers.

    750ml-5L · water and solvent

    Quote
  • Gloss & Satinwood

    Trim paints in brilliant white and tinted colours.

    750ml-5L · non-yellowing options

    Quote
  • Masonry Paint

    Smooth and textured exterior masonry paint.

    5/10L · 15yr formulations

    Quote

Plaster & Fillers

  • Multi-Finish Plaster

    Gypsum skim finish for most backgrounds.

    25kg · coverage ~10m²/bag

    Quote
  • Bonding & Hardwall

    Undercoat plasters for low and high suction.

    25kg · 11mm coat

    Quote
  • One-Coat & Patching Plaster

    Repair plasters for making good.

    2.5-25kg

    Quote
  • Ready-Mixed & Powder Fillers

    Interior fillers, fine surface and deep gap.

    600g-10L

    Quote

Preparation & Consumables

  • Abrasives

    Sanding sheets, rolls and mesh in all grits.

    P60-P240 · hook & loop

    Quote
  • Masking Tapes

    Standard, low-tack and precision masking.

    25-50mm × 50m

    Quote
  • Dust Sheets & Protection

    Cotton twill sheets, polythene and floor protection.

    12 × 9ft sheets · 100m rolls

    Quote
  • PVA & SBR Bonding Agents

    Sealing, priming and waterproofing admixtures.

    1-25L

    Quote

Woodcare & Trims

  • Woodstain & Varnish

    Interior and exterior woodstains and clear finishes.

    250ml-5L

    Quote
  • Decking & Fence Treatments

    Decking oils, stains and one-coat fence treatments.

    2.5-9L

    Quote
  • uPVC Trims & Cladding

    Fascia, soffit, and internal cladding trims.

    White and foiled · 5m lengths

    Quote
  • Knotting, Oils & Waxes

    Traditional finishing products.

    Shellac, Danish, tung

    Quote

13 · 16 representative lines

Kitchens & Bathrooms

Kitchen carcasses, worktops and bathroom sanitaryware in trade ranges for developers and fit out contractors. Plot specifications are held for the duration of a development. Suites and brassware are quoted from the schedule of accommodation.

Request a quote for Kitchens & Bathrooms
Kitchens & Bathrooms, material detail

Kitchen Units

  • Base & Wall Units

    Rigid and flat pack carcasses in trade ranges.

    18mm carcass · 300-1000mm

    Quote
  • Tall & Appliance Housings

    Larder units, oven housings and integrated appliance units.

    1970/2150mm heights

    Quote
  • Doors & Frontals

    Slab, shaker and handleless frontal ranges.

    Matched edge banding

    Quote
  • Sinks & Kitchen Taps

    Stainless and composite sinks with trade brassware.

    Single and 1.5 bowl

    Quote

Worktops

  • Laminate Worktops

    Postformed laminate tops in stone and timber decors.

    3000/4100 × 600 × 38mm

    Quote
  • Solid Timber Worktops

    Oak and beech stave tops for site finishing.

    40mm · oiled finish

    Quote
  • Compact & Solid Surface

    Slimline compact laminate and solid surface tops.

    12.5mm compact

    Quote
  • Upstands & Splashbacks

    Matching upstands and splashback panels.

    To worktop decor

    Quote

Bathroom Suites

  • Basins & Pedestals

    Ceramic basins, pedestals and semi pedestals.

    450-600mm · 1 and 2 tap hole

    Quote
  • WC Pans & Cisterns

    Close coupled, back to wall and concealed systems.

    Dual flush 4/2.6L

    Quote
  • Baths

    Acrylic single and double ended baths with panels.

    1500-1800mm · reinforced

    Quote
  • Furniture & Vanity Units

    Vanity units, WC units and mirrored cabinets.

    500-800mm widths

    Quote

Showers & Brassware

  • Shower Enclosures & Trays

    Pivot, sliding and walk in enclosures with low trays.

    760-1700mm · 6-8mm glass

    Quote
  • Mixer & Electric Showers

    Thermostatic bar mixers and electric showers.

    TMV2 · 8.5-10.5kW

    Quote
  • Basin & Bath Taps

    Mixers and pillar taps in trade ranges.

    Ceramic disc · WRAS

    Quote
  • Wetroom & Drainage

    Wetroom trays, linear wastes and tanking kits.

    Quoted to layout

    Quote

14 · 13 representative lines

Metalwork & Structural

Structural steel sections, reinforcement and masonry support supplied against engineers' schedules. Sections are cut, drilled and primed to fabrication drawings. Rebar is cut and bent against bar bending schedules. Certified mesh and tying consumables arrive in the same load.

Request a quote for Metalwork & Structural
Metalwork & Structural, material detail

Steel Sections

  • Universal Beams & Columns

    UB and UC sections cut to length, primed options.

    127 × 76 to 533 × 210 · S355

    Quote
  • Parallel Flange Channel

    PFC channel for trimmers and supports.

    100 × 50 to 300 × 100 · S355

    Quote
  • Rolled Steel Angle

    Equal and unequal angles.

    25 × 25 to 150 × 150mm

    Quote
  • Hollow Sections

    Square, rectangular and circular hollow sections.

    SHS/RHS/CHS · S355J2H

    Quote
  • Flat Bar & Plate

    Flats, plates and splice material.

    Cut and drilled to drawing

    Quote

Reinforcement

  • Reinforcement Bar

    High-yield rebar, stock lengths or cut and bent to schedule.

    H8-H32 · BS 4449 B500B

    Quote
  • Reinforcement Mesh

    Welded fabric mesh sheets.

    A142/A193/A252 · 4.8 × 2.4m

    Quote
  • Spacers, Chairs & Tying Wire

    Cover spacers, continuous chairs and tying consumables.

    25-75mm cover

    Quote
  • Dowel Bars & Couplers

    Plain dowels and mechanical couplers.

    To engineer's detail

    Quote

Masonry Support & Restraint

  • Housing Wall Ties

    Stainless cavity ties, types 1-4.

    200-300mm · BS EN 845-1

    Quote
  • Heavy Duty & Movement Ties

    Frame cramps, movement and starter ties.

    Stainless steel

    Quote
  • Restraint Straps

    Lateral restraint and holding-down straps.

    27.5/30mm × 1000-1600mm

    Quote
  • Windposts & Masonry Support

    Engineered windposts and shelf angle systems.

    Quoted to structural layout

    Quote

Can't see the exact line?

The library is deliberately curated. Send the specification or the schedule reference and the exact product is quoted, with availability and compliance confirmed. Delivery is nationwide.

Request a quote